How to Display the Caster/Scathach-Skadi 1/7 Fate Figure Safely

By Ichiba Japan: Authentic Anime Merch and Japanese Products | Published: 2026-11-04

Category: เคล็ดลับและการดูแล

A practical, step-by-step guide to displaying your Caster/Scathach-Skadi 1/7 scale figure without dust, UV damage, or tip-overs. Includes a dust routine and stability checks.

Quick answer

Display your Caster/Scathach-Skadi 1/7 figure on a stable, enclosed shelf away from direct sunlight, and dust it gently every two to four weeks with a soft brush. Avoid handling the figure by delicate parts, and keep it out of humid or high-traffic areas.

Why scale figures need a different setup than small merch

At roughly 24 cm tall, this 1/7 scale figure has a higher center of gravity and more surface area than a keychain or badge. That makes it more vulnerable to tipping and dust accumulation, so a dedicated, enclosed spot is worth the effort.

Unlike smaller items you can rotate frequently, a scale figure should stay in one stable location. Moving it often increases the risk of accidental drops or stress on thin parts.

The trade-off between open display and protection

Open shelves show off the figure from every angle but expose it to dust, pets, and sunlight. A glass cabinet or acrylic case reduces cleaning frequency and UV exposure, but it can dull details if the glass is reflective or the lighting is poor.

If you prefer open display, accept that you will need to dust more often and check stability regularly. There is no single right answer, but matching the enclosure to your room’s traffic and light levels will save you time.

Step-by-step display and care routine

Choose a stable, enclosed location: Place the figure on a sturdy shelf or inside a cabinet that is not in a walkway, near a door, or on a wobbly surface. Avoid direct sunlight and heat sources like radiators. Check that the shelf can handle the figure’s weight and that the door or cabinet will not bump it when opened.
Set up dust protection: Use a glass or acrylic display case with a close-fitting lid or door. If using an open shelf, add a small acrylic riser and keep the figure away from vents and windows. Make sure the case has ventilation holes to prevent condensation; sealed cases can trap moisture.
Place the figure without touching delicate parts: Hold the figure by its base or the most solid part of the body. Never lift by the cape, hair, or staff. Set it down gently and check that it stands level. If the figure wobbles, adjust the base or use a small piece of museum putty under one foot—never force it.
Dust every two to four weeks: Use a soft, clean makeup brush or a camera lens blower to remove dust. Work from top to bottom with light strokes. For stubborn dust, use a slightly damp microfiber cloth on the base only. Do not use canned air, which can propel dust into crevices or damage paint; avoid water on painted surfaces.
Check for UV and humidity monthly: Keep the figure out of direct sun and away from humidifiers. If your display area gets humid, add a small silica gel pack inside the case (not touching the figure). Signs of trouble include fading, stickiness, or a white haze—move the figure immediately if you see these.
Handle rarely and with clean hands: If you need to move the figure, wash and dry your hands first, and wear cotton gloves if you have them. Support the figure with both hands and clear the path before lifting. Never pick up the figure by the head or hair, even for a quick adjustment.

Product facts

Caster/Scathach-Skadi (Second Ascension) 1/7 Figure - Fate/Grand Order: Approximately 24 cm tall (1/7 scale). Its height means it needs a shelf with at least a few centimeters of clearance above and a base wide enough to prevent tipping.
Caster/Scathach-Skadi (Second Ascension) 1/7 Figure - Fate/Grand Order